Three types of wood flooring and how to choose between them.
Filed Under Wood Flooring | Leave a Comment
Few home improvement projects improve the appearance and value of your home as much as wood flooring. Hardwood floors make any space — from a formal living room to a country kitchen — look better. And wood flooring is an investment that provides lasting benefits. A good-quality, well maintained wood floor will last a lifetime.
Because wood flooring is easy to care for and doesn’t show dirt or stain like carpeting, it’s a good choice for families with children and pets.
When you first start shopping for wood flooring, you may be overwhelmed by the choices. But there are basically just three types of wood floors. The type that’s best for you will depend on a number of factors, including where the floor will be installed and how much traffic it will get.
Solid wood flooring.
As the name implies, solid wood flooring is made from pieces of wood that are between 1/4″ and 1″ thick. As a rule, the tongue-and-groove boards fit together and are installed by nailing them to a sub floor of æî plywood. For this reason, solid wood floors can’t usually be used over concrete slabs.
Building a sub floor to use over concrete essentially doubles the cost of using solid wood. So if you have a concrete floor, you’re better off with an engineered wood floor.
Because solid wood expands and contracts with variations in moisture and temperature, it’s also unsuitable for areas where those conditions fluctuate dramatically.
You can choose from a wide assortment of solid woods, stains, and finishes. Or you can buy your flooring unfinished and having it finished after it’s installed. This is ideal if you’re trying to match a pre-existing floor. But it’s a messy process and not everyone will be want to put up with the noise and dust.
Because there is usually 1/4″ or more of wood above the tongue and groove, solid wood floors can be sanded down and refinished. If you have lots of traffic or large dogs, solid wood flooring are a great choice.
Engineered wood flooring.
This kind of flooring is made of several layers — or plys — that are laminated together. Usually a base, a core, and a veneer. The top layer or veneer varies in thickness. But for the best wear, it should be at least 3/16th of an inch thick.
Veneers of 1/8″ or less are usually rotary peeled. Thicker veneers are sawed and look more like solid wood. Veneers of 5/16th can usually be sanded.
The grain on the plys in engineered wood run in different directions, which makes the flooring more stable. Engineered wood flooring won’t warp, and because it can be glued, stapled or floated, it can be used almost anywhere.
Most engineered floors come prefinished with 3 – 10 layers of urethane. But a huge selection of finishes is available. If your sub floor is a concrete slab, engineered wood will cost you about half as much as solid wood.
Acrylic-impregnated wood flooring.
Better known by the brand name Pergo, acrylic-impregnated wood floors are extremely durable. In fact, they’re 300% harder than natural wood. Liquid acrylic, stain, and fire retardants are injected into the wood and then it’s cured.
Because impregnated wood is water resistant, it’s often used in kitchens and bathrooms. And because the color goes all the way through, it’s ideal in commercial setting like restaurants, where there’s lots of traffic and wear. In fact, scratches are barely detectable.
Many people don’t like the look of acrylic-impregnated wood floors, but they are the best choice if you want the appearance of wood but need a more durable floor.
Comments
Leave a Reply
